Robotic automation insights for integrators and manufacturers — case studies, whitepapers, and guides on no-code programming, finishing, and welding.
Between every pass in a multi-pass job, the robot has to travel somewhere safe — and placing those moves by hand is slow and easy to get wrong. The Connector plans that transit motion for you: collision-aware, singularity-aware, and optimized.
Read MoreRotary Scanning captures full part geometry as the part turns on a positioner — most parts in a single continuous pass. This post walks the workflow end to end: calibrating the rotary axis, setting up the scan, and turning the captured mesh into robot motion.
Read MorePath Optimizer V2, Custom Colliders, Connector, Concurrent Positioner, the Curved profile in AutoSurface, Techman robot support, and Rotary Scanning. Six of the seven land on Augmentus Standard; Rotary Scanning is the one that needs Pro.
Read MoreAugmentus 3.0 introduces one-click toolpath generation, vision-guided adaptive robotics, and a set of cell-level improvements aimed at high-mix shop floors.
Read MoreA recap of the Augmentus and Servind joint stand at Hannover Messe 2026 — live scan-to-path demonstrations, international interest, and what's next for the partnership.
Read MoreManual edge teaching for deburring and material removal is one of the slowest parts of a finishing cell. AutoEdge generates the toolpath straight from a CAD file, in minutes.
Read MoreSurface operations need hundreds of waypoints with consistent tool orientation. AutoSurface generates the entire toolpath from CAD or a 3D scan — no manual programming required.
Read MoreAugmentus partners with iRobotics to bring AI-powered AutoPath™ to Indian manufacturers as part of a complete, locally serviced turnkey system.
Read MoreAugmentus showcases AutoPath for aviation MRO at MRO Americas 2026 — Orlando, 21 to 23 April — demonstrating waypoint generation in minutes for thermal-spray, shot-peening, and blasting cells.
Read More
